Safety instructions
Risk:
Store in a well-ventilated place. Keep container tightly closed. Toxic to aquatic life with long lasting effects. Keep out of reach of children. Use explosion-proof [electrical/ventilating/lighting/] equipment. Specific treatment (see on this label). Take off contaminated clothing and wash it before reuse. Use only non-sparking tools. May cause drowsiness or dizziness. Store in a well-ventilated place. Keep cool. In case of fire: Use to extinguish. Keep container tightly closed. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN: Wash with plenty of water/ If skin irritation occurs: Get medical advice/attention. Do not spray on an open flame or other ignition source. Store locked up. Pressurised container: May burst if heated. Dispose of contents/container to Recycling Do not pierce or burn, even after use. Protect from sunlight. Do no expose to temperatures exceeding 50 o C/ 122 o F. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. IF SWALLOWED: Immediately call a POISON CENTER/doctor/ Avoid release to the environment. Causes skin irritation. Use only outdoors or in a well-ventilated area. Collect spillage.
- For degreasing metal surfaces before burnishing
- Removes oils and greases during cleaning
- Contains no aromatic hydrocarbons and no nitro solvents.
- Also ideal for cleaning before installation
The effective grease remover
Ballistol cold degreaser removes oil, grease and dried, resinous oils from all metals and plastic parts. Ideal for pre-treatment of metal surfaces during burnishing or electroplating. Or simply to remove unwanted grease residues or adhesive residues.
Ballistol cold degreaser is ecologically neutral, its components are degraded in nature by photooxidation.
Application: Depending on the degree of oiling, Ballistol cold greaser is applied to the part to be degreased several times with the brush and then wiped off. Finally, wet the grease-free area extensively with the dripping brush and drain off any excess Ballistol cold degreaser. After drying, the area is free of grease, now the follow-up treatment can be carried out.
Special Characteristics
acetone-free