Ballistol Trophy Bleaching - for pure white skulls and bones
The memory of a special harvest never fades. The trophy, however, does: skulls and bone parts yellow over the years, and without a white base, even the finest antlers no longer show to full advantage.
Ballistol Trophy Bleaching bleaches skulls and other bone parts pure white, both for initial preparation and for the restoration of older pieces. Even trophies that have hung on the wall for years and have darkened noticeably become bright again.
Ballistol Trophy Bleaching is a special bleaching agent for the professional whitening of hunting trophies such as skulls and antler bases. Developed for hunters, taxidermists and anyone who wants to prepare trophies properly, the product solves a central problem of trophy care: discoloured, yellowed or unevenly white bone surfaces can be whitened in a targeted and lasting way.
Performance & Areas of Use
To achieve the best and most even result possible, it is first important to clean the trophy to be treated (e.g. skull) as thoroughly as possible. It should be largely free of grease and free of tissue residues and other residues. Pre-cleaning by boiling in water with a little detergent or washing-up liquid is common practice. This step is often underestimated, but it determines the result: on greasy areas or areas with tissue residues, the bleach acts unevenly, and the result is blotchy instead of evenly white.
Preparing the bleaching solution (Ballistol Trophy Bleaching):
Add two level tablespoons (approx. 15–20 g) of Trophy Bleaching per 100 ml to cold water. Depending on the degree of saturation, the powder will dissolve completely or some will remain undissolved. Please fill the pot no more than halfway, as heavy foam may form and the solution may overflow. It is important to use the bleaching solution as fresh as possible. A solution that has already been used, or a solution left standing for a long time without a trophy, gradually loses its effect, as the active ingredients it contains decompose on their own.
Treating the skull:
Immerse the cleaned skull in the solution and stir a little. As far as possible, make sure that all areas to be treated come into sufficient contact with the solution. Leave the skull in the solution overnight and then heat the solution to approx. 50 °C. Alternatively, you can wrap the skull in kitchen paper and repeatedly pour the bleaching solution over it thoroughly.
After approx. 15 hours, rinse the trophy with water. If the bleaching is not yet complete, the process can be repeated. This way, even yellowed skulls become pure white again.
Drying:
After treatment, the skull should be placed in a suitable, well-ventilated place to dry. Indirect sunlight is ideal. However, the skull should not be exposed to direct sunlight, as drying too quickly and unevenly can lead to cracks. The UV radiation of daylight supports the bleaching process. After approx. 2 days, even soaked, darker areas of the trophy should be brilliant white.
Disposal:
The used solution can be disposed of via the sewer system.
Working safely:
Trophy Bleaching is a bleaching agent and must be handled accordingly. Always wear protective gloves, protective clothing and eye protection during use. Avoid inhaling powder dust and any fumes produced, and work only in a well-ventilated environment. Do not eat, drink or smoke while using the product, and wash your hands thoroughly after use. Store the product locked up and out of the reach of children.
Mode of Action:
Trophy Bleaching contains two strong oxidising agents, sodium percarbonate and sodium persulphate, which oxidise organic substances to CO₂. With the specified quantity, the sodium percarbonate produces a 3–5% hydrogen peroxide solution in water. Heat supports and accelerates this oxidation process, which is why heating the solution enhances or accelerates the effect accordingly. Boiling should be avoided; it is sufficient for the water to begin to simmer, i.e. for bubbles to rise slowly.
Technical Properties
- Active ingredients: sodium percarbonate and sodium persulphate, two strong oxidising agents
- Mode of action: oxidation of organic residues to CO₂, formation of hydrogen peroxide by sodium percarbonate
- Dosage: approx. 15–20 g (two level tablespoons) per 100 ml of cold water
- Application time: approx. 15 hours of exposure time
- Optimum temperature: approx. 50 °C to accelerate the effect
- Drying time: approx. 2 days with good ventilation and indirect sunlight
- Disposal: used solution can be disposed of via the sewer system
- Safety instructions: protective gloves, protective clothing and eye protection required, use only in a well-ventilated environment, keep out of the reach of children
Risk: Avoid breathing dust/fume/gas/mist/vapours/ spray. Dispose of contents/container to Recycling May cause an allergic skin reaction. Keep out of reach of children. May cause respiratory irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/ Wash contaminated clothing before reuse. Causes skin irritation. Wash Hände thoroughly after handling. If experiencing respiratory symptoms: Call a POISON CENTER/doctor/ Causes serious eye damage. Do not eat, drink or smoke when using this product. If medical advice is needed, have product container or label at hand. Harmful if swallowed. If skin irritation or rash occurs: Get medical advice/attention. Store locked up.