Safety instructions
Risk:
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Protect from sunlight. Do no expose to temperatures exceeding 50 o C/ 122 o F. Store in a well-ventilated place. Keep cool. Causes skin irritation. Pressurised container: May burst if heated. Keep container tightly closed. Dispose of contents/container to Recycling Collect spillage. Store locked up. Do NOT induce vomiting. Store in a well-ventilated place. Keep container tightly closed. Use only non-sparking tools. Specific treatment (see on this label). Keep out of reach of children. Take off contaminated clothing and wash it before reuse. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Toxic to aquatic life with long lasting effects. May cause drowsiness or dizziness. IF ON SKIN: Wash with plenty of water/ Do not pierce or burn, even after use. In case of fire: Use to extinguish. IF SWALLOWED: Immediately call a POISON CENTER/doctor/ Use explosion-proof [electrical/ventilating/lighting/] equipment. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. If skin irritation occurs: Get medical advice/attention. Do not spray on an open flame or other ignition source.
- For degreasing metal surfaces before burnishing
- Removes oils and greases during cleaning
- Contains no aromatic hydrocarbons and no nitro solvents.
- Also ideal for cleaning before installation
The effective grease remover
Ballistol cold degreaser removes oil, grease and dried, resinous oils from all metals and plastic parts. Ideal for pre-treatment of metal surfaces during burnishing or electroplating. Or simply to remove unwanted grease residues or adhesive residues.
Ballistol cold degreaser is ecologically neutral, its components are degraded in nature by photooxidation.
Application: Depending on the degree of oiling, Ballistol cold greaser is applied to the part to be degreased several times with the brush and then wiped off. Finally, wet the grease-free area extensively with the dripping brush and drain off any excess Ballistol cold degreaser. After drying, the area is free of grease, now the follow-up treatment can be carried out.
Special Characteristics
acetone-free